✨ New Arrivals Just Dropped!Explore
USED Psychedelic Guitars / Custom TL See-Through Black [12]
A Japanese brand specializing in custom-order instruments, crafted by the workshop "TUNE Guitar Maniac" in Amagasaki City, Hyogo Prefecture.
This instrument is a custom-order model based on the TL type.
It features the classic configuration of an ash body, maple neck, and rosewood fingerboard, equipped with three Dimarzio DP168 Minibuckers.
It features a bar bridge, offering a distinctive design that retains the classic TL look while incorporating LP-like nuances in both sound and playability.
Additionally, the neck joint has been contoured to ensure playability in the higher frets.
As no spec sheet is included, detailed specifications beyond those listed above are unknown.
Upon arrival, we have cleaned the guitar and performed a basic setup.
While there are signs of general wear, there is no damage that would interfere with normal use.
Visually, there are a few small areas of paint chipping on the body end, along with a larger dent in the same vicinity. These are purely cosmetic issues and do not affect the instrument’s structure or playability.
Condition Grade: B+: Some scratches, but no issues for normal use
Case: Non-original soft case
Weight: 3.28 kg
Truss Rod: Tested up to 60 degrees in both directions; no issues
Fret Wear: Fret height is sufficient for playable conditions
String height (low-E string): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.2 mm
Neck thickness near the 12th fret: 23.2 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
This instrument is a custom-order model based on the TL type.
It features the classic configuration of an ash body, maple neck, and rosewood fingerboard, equipped with three Dimarzio DP168 Minibuckers.
It features a bar bridge, offering a distinctive design that retains the classic TL look while incorporating LP-like nuances in both sound and playability.
Additionally, the neck joint has been contoured to ensure playability in the higher frets.
As no spec sheet is included, detailed specifications beyond those listed above are unknown.
Upon arrival, we have cleaned the guitar and performed a basic setup.
While there are signs of general wear, there is no damage that would interfere with normal use.
Visually, there are a few small areas of paint chipping on the body end, along with a larger dent in the same vicinity. These are purely cosmetic issues and do not affect the instrument’s structure or playability.
Condition Grade: B+: Some scratches, but no issues for normal use
Case: Non-original soft case
Weight: 3.28 kg
Truss Rod: Tested up to 60 degrees in both directions; no issues
Fret Wear: Fret height is sufficient for playable conditions
String height (low-E string): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.2 mm
Neck thickness near the 12th fret: 23.2 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$2.45
Original: $7.01
-65%USED Psychedelic Guitars / Custom TL See-Through Black [12]—
$7.01
$2.45
Description
A Japanese brand specializing in custom-order instruments, crafted by the workshop "TUNE Guitar Maniac" in Amagasaki City, Hyogo Prefecture.
This instrument is a custom-order model based on the TL type.
It features the classic configuration of an ash body, maple neck, and rosewood fingerboard, equipped with three Dimarzio DP168 Minibuckers.
It features a bar bridge, offering a distinctive design that retains the classic TL look while incorporating LP-like nuances in both sound and playability.
Additionally, the neck joint has been contoured to ensure playability in the higher frets.
As no spec sheet is included, detailed specifications beyond those listed above are unknown.
Upon arrival, we have cleaned the guitar and performed a basic setup.
While there are signs of general wear, there is no damage that would interfere with normal use.
Visually, there are a few small areas of paint chipping on the body end, along with a larger dent in the same vicinity. These are purely cosmetic issues and do not affect the instrument’s structure or playability.
Condition Grade: B+: Some scratches, but no issues for normal use
Case: Non-original soft case
Weight: 3.28 kg
Truss Rod: Tested up to 60 degrees in both directions; no issues
Fret Wear: Fret height is sufficient for playable conditions
String height (low-E string): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.2 mm
Neck thickness near the 12th fret: 23.2 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
This instrument is a custom-order model based on the TL type.
It features the classic configuration of an ash body, maple neck, and rosewood fingerboard, equipped with three Dimarzio DP168 Minibuckers.
It features a bar bridge, offering a distinctive design that retains the classic TL look while incorporating LP-like nuances in both sound and playability.
Additionally, the neck joint has been contoured to ensure playability in the higher frets.
As no spec sheet is included, detailed specifications beyond those listed above are unknown.
Upon arrival, we have cleaned the guitar and performed a basic setup.
While there are signs of general wear, there is no damage that would interfere with normal use.
Visually, there are a few small areas of paint chipping on the body end, along with a larger dent in the same vicinity. These are purely cosmetic issues and do not affect the instrument’s structure or playability.
Condition Grade: B+: Some scratches, but no issues for normal use
Case: Non-original soft case
Weight: 3.28 kg
Truss Rod: Tested up to 60 degrees in both directions; no issues
Fret Wear: Fret height is sufficient for playable conditions
String height (low-E string): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.2 mm
Neck thickness near the 12th fret: 23.2 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
