✨ New Arrivals Just Dropped!Explore
[SN 76 69702] USED FENDER USA / 1976 Stratocaster Hardtail Sunburst [06]
Rare hardtail spec 70s Strat is now in stock!
Ash body and maple one-piece neck with hardtail (back-through) specification without tremolo mechanism.
The PU is the original flat pole piece with 3 gray bobbins, the PU selector is also the original 3-point type, and the other electrical components are also original.
Neck Date: 903 3764
PU Date: (F)121876/(M)121876/(R)241776
POT Date: 13707606 x 3
Fret and nut have been replaced, and both body and neck have been oversprayed.
There are cracks in the paint around the neck joint and inside the left and right horns. There are also some dents on the inside of the horns.
There are also some minor scratches, dents, and paint fading consistent with the age of the instrument.
The pickguard has been replaced.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: 76 69702
Year of manufacture: 1976
Country of manufacture: U.S.A.
Case: Non-authentic hard case
Weight: 4.23kg
Truss Rod: The truss rod is completely loose, but there is no problem with the neck.
Fret Depth: No problem, sufficient fret height.
String Height: 2.0mm above the 12th fret on the bass string side
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.41mm
Neck thickness near 1st fret: 20.77mm
Neck thickness near 12th fret: 23.42mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Ash body and maple one-piece neck with hardtail (back-through) specification without tremolo mechanism.
The PU is the original flat pole piece with 3 gray bobbins, the PU selector is also the original 3-point type, and the other electrical components are also original.
Neck Date: 903 3764
PU Date: (F)121876/(M)121876/(R)241776
POT Date: 13707606 x 3
Fret and nut have been replaced, and both body and neck have been oversprayed.
There are cracks in the paint around the neck joint and inside the left and right horns. There are also some dents on the inside of the horns.
There are also some minor scratches, dents, and paint fading consistent with the age of the instrument.
The pickguard has been replaced.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: 76 69702
Year of manufacture: 1976
Country of manufacture: U.S.A.
Case: Non-authentic hard case
Weight: 4.23kg
Truss Rod: The truss rod is completely loose, but there is no problem with the neck.
Fret Depth: No problem, sufficient fret height.
String Height: 2.0mm above the 12th fret on the bass string side
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.41mm
Neck thickness near 1st fret: 20.77mm
Neck thickness near 12th fret: 23.42mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$5.41
Original: $15.45
-65%[SN 76 69702] USED FENDER USA / 1976 Stratocaster Hardtail Sunburst [06]—
$15.45
$5.41
Description
Rare hardtail spec 70s Strat is now in stock!
Ash body and maple one-piece neck with hardtail (back-through) specification without tremolo mechanism.
The PU is the original flat pole piece with 3 gray bobbins, the PU selector is also the original 3-point type, and the other electrical components are also original.
Neck Date: 903 3764
PU Date: (F)121876/(M)121876/(R)241776
POT Date: 13707606 x 3
Fret and nut have been replaced, and both body and neck have been oversprayed.
There are cracks in the paint around the neck joint and inside the left and right horns. There are also some dents on the inside of the horns.
There are also some minor scratches, dents, and paint fading consistent with the age of the instrument.
The pickguard has been replaced.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: 76 69702
Year of manufacture: 1976
Country of manufacture: U.S.A.
Case: Non-authentic hard case
Weight: 4.23kg
Truss Rod: The truss rod is completely loose, but there is no problem with the neck.
Fret Depth: No problem, sufficient fret height.
String Height: 2.0mm above the 12th fret on the bass string side
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.41mm
Neck thickness near 1st fret: 20.77mm
Neck thickness near 12th fret: 23.42mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Ash body and maple one-piece neck with hardtail (back-through) specification without tremolo mechanism.
The PU is the original flat pole piece with 3 gray bobbins, the PU selector is also the original 3-point type, and the other electrical components are also original.
Neck Date: 903 3764
PU Date: (F)121876/(M)121876/(R)241776
POT Date: 13707606 x 3
Fret and nut have been replaced, and both body and neck have been oversprayed.
There are cracks in the paint around the neck joint and inside the left and right horns. There are also some dents on the inside of the horns.
There are also some minor scratches, dents, and paint fading consistent with the age of the instrument.
The pickguard has been replaced.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: 76 69702
Year of manufacture: 1976
Country of manufacture: U.S.A.
Case: Non-authentic hard case
Weight: 4.23kg
Truss Rod: The truss rod is completely loose, but there is no problem with the neck.
Fret Depth: No problem, sufficient fret height.
String Height: 2.0mm above the 12th fret on the bass string side
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.41mm
Neck thickness near 1st fret: 20.77mm
Neck thickness near 12th fret: 23.42mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
