✨ New Arrivals Just Dropped!Explore
[SN CIJ O014987] USED Fender Japan / Stratocaster ST57-58US Black [12]
A Fender Japan Stratocaster built to 1957 specifications and equipped with US-made pickups as standard.
Featuring a basswood body with characteristics similar to alder, a one-piece maple neck, and a single-ply pickguard—all in 50s specs.
It is equipped with Fender USA original pickups that faithfully reproduce a well-balanced, clear vintage sound.
There is some paint chipping at the tip of the headstock, and fine scratches and dents are scattered throughout the body; there is also a crack in a portion of the back panel.
Although there is little adjustment left on the truss rod, the neck is in good condition with no buzzing or loose frets.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: CIJ O014987
Year of Manufacture: 1997-2000
Country of Manufacture: Japan
Case: Genuine soft case
Accessories: Arm
Weight: 3.45 kg
Truss Rod: Checked up to 60 degrees left and right; no issues (some play remaining)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.5 mm
Neck thickness near the 1st fret: 21.4 mm
Neck thickness near the 12th fret: 24.5 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Featuring a basswood body with characteristics similar to alder, a one-piece maple neck, and a single-ply pickguard—all in 50s specs.
It is equipped with Fender USA original pickups that faithfully reproduce a well-balanced, clear vintage sound.
There is some paint chipping at the tip of the headstock, and fine scratches and dents are scattered throughout the body; there is also a crack in a portion of the back panel.
Although there is little adjustment left on the truss rod, the neck is in good condition with no buzzing or loose frets.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: CIJ O014987
Year of Manufacture: 1997-2000
Country of Manufacture: Japan
Case: Genuine soft case
Accessories: Arm
Weight: 3.45 kg
Truss Rod: Checked up to 60 degrees left and right; no issues (some play remaining)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.5 mm
Neck thickness near the 1st fret: 21.4 mm
Neck thickness near the 12th fret: 24.5 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$1.43
Original: $4.10
-65%[SN CIJ O014987] USED Fender Japan / Stratocaster ST57-58US Black [12]—
$4.10
$1.43
Description
A Fender Japan Stratocaster built to 1957 specifications and equipped with US-made pickups as standard.
Featuring a basswood body with characteristics similar to alder, a one-piece maple neck, and a single-ply pickguard—all in 50s specs.
It is equipped with Fender USA original pickups that faithfully reproduce a well-balanced, clear vintage sound.
There is some paint chipping at the tip of the headstock, and fine scratches and dents are scattered throughout the body; there is also a crack in a portion of the back panel.
Although there is little adjustment left on the truss rod, the neck is in good condition with no buzzing or loose frets.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: CIJ O014987
Year of Manufacture: 1997-2000
Country of Manufacture: Japan
Case: Genuine soft case
Accessories: Arm
Weight: 3.45 kg
Truss Rod: Checked up to 60 degrees left and right; no issues (some play remaining)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.5 mm
Neck thickness near the 1st fret: 21.4 mm
Neck thickness near the 12th fret: 24.5 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Featuring a basswood body with characteristics similar to alder, a one-piece maple neck, and a single-ply pickguard—all in 50s specs.
It is equipped with Fender USA original pickups that faithfully reproduce a well-balanced, clear vintage sound.
There is some paint chipping at the tip of the headstock, and fine scratches and dents are scattered throughout the body; there is also a crack in a portion of the back panel.
Although there is little adjustment left on the truss rod, the neck is in good condition with no buzzing or loose frets.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: CIJ O014987
Year of Manufacture: 1997-2000
Country of Manufacture: Japan
Case: Genuine soft case
Accessories: Arm
Weight: 3.45 kg
Truss Rod: Checked up to 60 degrees left and right; no issues (some play remaining)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.5 mm
Neck thickness near the 1st fret: 21.4 mm
Neck thickness near the 12th fret: 24.5 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
