✨ New Arrivals Just Dropped!Explore
[SN B36366] USED Bill Lawrence / BL3M-55G Red [10]
Bright Red Sharan Q Hatake Model!!
* The product shown in the image includes all accessories.
* If any issues are found during the final pre-shipment inspection, we will notify you separately.
* Truss rod, remaining frets, string height, etc., are the settings measured during setup and adjustment at our repair center.
* This item is a one-of-a-kind piece.
As this item is listed on multiple marketplaces, we strive to promptly remove sold listings. However, this is not always in real-time. If the item is sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: B36366
Country of Manufacture: Japan
Case: Soft case
Weight: 3.57kg
Truss Rod: No issues. Rod tested to 60 degrees left and right with no problems.
Fret Wear: No issues. Sufficient fret height present
String Height (Low String Side): 2.0mm at 12th fret
String Height (Treble Side): 1.5mm above the 12th fret
Nut width: 41.8mm
Neck Thickness Near 1st Fret: 21.4mm
Neck Thickness at 12th Fret: 23.7mm
Scale length: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repair/Maintenance: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment
Other: Case chuck handle has a chip, burn mark on body end stand, scattered paint chips and dents on body edges and neck sides. Shows normal signs of use for its age, but is in clean condition after cleaning and setup.
* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please understand this beforehand.
* Any measurements listed for the truss rod, remaining frets, or string height were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the instrument will have the same measurements upon arrival.
* This item is a single, physical unit listed simultaneously on multiple marketplaces, including in-store displays. We strive to promptly remove sold items from listings, but updates may not occur in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
* The product shown in the image includes all accessories.
* If any issues are found during the final pre-shipment inspection, we will notify you separately.
* Truss rod, remaining frets, string height, etc., are the settings measured during setup and adjustment at our repair center.
* This item is a one-of-a-kind piece.
As this item is listed on multiple marketplaces, we strive to promptly remove sold listings. However, this is not always in real-time. If the item is sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: B36366
Country of Manufacture: Japan
Case: Soft case
Weight: 3.57kg
Truss Rod: No issues. Rod tested to 60 degrees left and right with no problems.
Fret Wear: No issues. Sufficient fret height present
String Height (Low String Side): 2.0mm at 12th fret
String Height (Treble Side): 1.5mm above the 12th fret
Nut width: 41.8mm
Neck Thickness Near 1st Fret: 21.4mm
Neck Thickness at 12th Fret: 23.7mm
Scale length: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repair/Maintenance: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment
Other: Case chuck handle has a chip, burn mark on body end stand, scattered paint chips and dents on body edges and neck sides. Shows normal signs of use for its age, but is in clean condition after cleaning and setup.
* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please understand this beforehand.
* Any measurements listed for the truss rod, remaining frets, or string height were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the instrument will have the same measurements upon arrival.
* This item is a single, physical unit listed simultaneously on multiple marketplaces, including in-store displays. We strive to promptly remove sold items from listings, but updates may not occur in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
$0.97
Original: $2.77
-65%[SN B36366] USED Bill Lawrence / BL3M-55G Red [10]—
$2.77
$0.97
Description
Bright Red Sharan Q Hatake Model!!
* The product shown in the image includes all accessories.
* If any issues are found during the final pre-shipment inspection, we will notify you separately.
* Truss rod, remaining frets, string height, etc., are the settings measured during setup and adjustment at our repair center.
* This item is a one-of-a-kind piece.
As this item is listed on multiple marketplaces, we strive to promptly remove sold listings. However, this is not always in real-time. If the item is sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: B36366
Country of Manufacture: Japan
Case: Soft case
Weight: 3.57kg
Truss Rod: No issues. Rod tested to 60 degrees left and right with no problems.
Fret Wear: No issues. Sufficient fret height present
String Height (Low String Side): 2.0mm at 12th fret
String Height (Treble Side): 1.5mm above the 12th fret
Nut width: 41.8mm
Neck Thickness Near 1st Fret: 21.4mm
Neck Thickness at 12th Fret: 23.7mm
Scale length: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repair/Maintenance: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment
Other: Case chuck handle has a chip, burn mark on body end stand, scattered paint chips and dents on body edges and neck sides. Shows normal signs of use for its age, but is in clean condition after cleaning and setup.
* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please understand this beforehand.
* Any measurements listed for the truss rod, remaining frets, or string height were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the instrument will have the same measurements upon arrival.
* This item is a single, physical unit listed simultaneously on multiple marketplaces, including in-store displays. We strive to promptly remove sold items from listings, but updates may not occur in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
* The product shown in the image includes all accessories.
* If any issues are found during the final pre-shipment inspection, we will notify you separately.
* Truss rod, remaining frets, string height, etc., are the settings measured during setup and adjustment at our repair center.
* This item is a one-of-a-kind piece.
As this item is listed on multiple marketplaces, we strive to promptly remove sold listings. However, this is not always in real-time. If the item is sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: B36366
Country of Manufacture: Japan
Case: Soft case
Weight: 3.57kg
Truss Rod: No issues. Rod tested to 60 degrees left and right with no problems.
Fret Wear: No issues. Sufficient fret height present
String Height (Low String Side): 2.0mm at 12th fret
String Height (Treble Side): 1.5mm above the 12th fret
Nut width: 41.8mm
Neck Thickness Near 1st Fret: 21.4mm
Neck Thickness at 12th Fret: 23.7mm
Scale length: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repair/Maintenance: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment
Other: Case chuck handle has a chip, burn mark on body end stand, scattered paint chips and dents on body edges and neck sides. Shows normal signs of use for its age, but is in clean condition after cleaning and setup.
* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please understand this beforehand.
* Any measurements listed for the truss rod, remaining frets, or string height were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the instrument will have the same measurements upon arrival.
* This item is a single, physical unit listed simultaneously on multiple marketplaces, including in-store displays. We strive to promptly remove sold items from listings, but updates may not occur in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
