✨ New Arrivals Just Dropped!Explore
[SN SZ9384478] USED FENDER USA / Eric Clapton Stratocaster Black [06]
A used 2009 Eric Clapton Stratocaster has arrived!
This signature model features a special V-shaped neck based on Eric Clapton's personal specifications, paired with a blocked tremolo unit.
Features an alder body with a maple neck and fingerboard.
Equipped with three Vintage Noiseless Single-Coil Strat pickups.
Controls include Volume, TBX Tone Control, and Mid Boost.
There are headstock dents, slight logo chipping, body top dents and scratches, and a buckle scar on the body back.
Other minor scratches, dents, and dullness on metal parts are present, indicating slightly heavier signs of use.
Cleaned and fully adjusted after arrival; plays perfectly fine.
Condition Grade: B+: Some minor imperfections present, but does not affect normal use.
Serial Number: SZ9384478
Year of Manufacture: 2009
Country of Manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.73kg
Truss Rod: No issues. Rod tested to 60 degrees left and right with no problems.
Fret Wear: No issues. Sufficient fret height present
String Height (Low String Side): 2.0mm above the 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 42.1mm
Neck Thickness Near 1st Fret: 21.7mm
Neck Thickness at 12th Fret: 22.6mm
Scale length: 648mm (25.5")
Fingerboard radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance Areas: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment, Nut Slot Adjustment
* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please be aware of this beforehand.
* Any measurements listed for the truss rod, remaining frets, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the instrument will have the same measurements upon arrival.
* This item is a one-of-a-kind piece currently listed on multiple marketplaces, including our physical store display. We strive to promptly remove sold items from listings, but updates may not occur in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
This signature model features a special V-shaped neck based on Eric Clapton's personal specifications, paired with a blocked tremolo unit.
Features an alder body with a maple neck and fingerboard.
Equipped with three Vintage Noiseless Single-Coil Strat pickups.
Controls include Volume, TBX Tone Control, and Mid Boost.
There are headstock dents, slight logo chipping, body top dents and scratches, and a buckle scar on the body back.
Other minor scratches, dents, and dullness on metal parts are present, indicating slightly heavier signs of use.
Cleaned and fully adjusted after arrival; plays perfectly fine.
Condition Grade: B+: Some minor imperfections present, but does not affect normal use.
Serial Number: SZ9384478
Year of Manufacture: 2009
Country of Manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.73kg
Truss Rod: No issues. Rod tested to 60 degrees left and right with no problems.
Fret Wear: No issues. Sufficient fret height present
String Height (Low String Side): 2.0mm above the 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 42.1mm
Neck Thickness Near 1st Fret: 21.7mm
Neck Thickness at 12th Fret: 22.6mm
Scale length: 648mm (25.5")
Fingerboard radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance Areas: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment, Nut Slot Adjustment
* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please be aware of this beforehand.
* Any measurements listed for the truss rod, remaining frets, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the instrument will have the same measurements upon arrival.
* This item is a one-of-a-kind piece currently listed on multiple marketplaces, including our physical store display. We strive to promptly remove sold items from listings, but updates may not occur in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
$3.10
Original: $8.86
-65%[SN SZ9384478] USED FENDER USA / Eric Clapton Stratocaster Black [06]—
$8.86
$3.10
Description
A used 2009 Eric Clapton Stratocaster has arrived!
This signature model features a special V-shaped neck based on Eric Clapton's personal specifications, paired with a blocked tremolo unit.
Features an alder body with a maple neck and fingerboard.
Equipped with three Vintage Noiseless Single-Coil Strat pickups.
Controls include Volume, TBX Tone Control, and Mid Boost.
There are headstock dents, slight logo chipping, body top dents and scratches, and a buckle scar on the body back.
Other minor scratches, dents, and dullness on metal parts are present, indicating slightly heavier signs of use.
Cleaned and fully adjusted after arrival; plays perfectly fine.
Condition Grade: B+: Some minor imperfections present, but does not affect normal use.
Serial Number: SZ9384478
Year of Manufacture: 2009
Country of Manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.73kg
Truss Rod: No issues. Rod tested to 60 degrees left and right with no problems.
Fret Wear: No issues. Sufficient fret height present
String Height (Low String Side): 2.0mm above the 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 42.1mm
Neck Thickness Near 1st Fret: 21.7mm
Neck Thickness at 12th Fret: 22.6mm
Scale length: 648mm (25.5")
Fingerboard radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance Areas: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment, Nut Slot Adjustment
* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please be aware of this beforehand.
* Any measurements listed for the truss rod, remaining frets, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the instrument will have the same measurements upon arrival.
* This item is a one-of-a-kind piece currently listed on multiple marketplaces, including our physical store display. We strive to promptly remove sold items from listings, but updates may not occur in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
This signature model features a special V-shaped neck based on Eric Clapton's personal specifications, paired with a blocked tremolo unit.
Features an alder body with a maple neck and fingerboard.
Equipped with three Vintage Noiseless Single-Coil Strat pickups.
Controls include Volume, TBX Tone Control, and Mid Boost.
There are headstock dents, slight logo chipping, body top dents and scratches, and a buckle scar on the body back.
Other minor scratches, dents, and dullness on metal parts are present, indicating slightly heavier signs of use.
Cleaned and fully adjusted after arrival; plays perfectly fine.
Condition Grade: B+: Some minor imperfections present, but does not affect normal use.
Serial Number: SZ9384478
Year of Manufacture: 2009
Country of Manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.73kg
Truss Rod: No issues. Rod tested to 60 degrees left and right with no problems.
Fret Wear: No issues. Sufficient fret height present
String Height (Low String Side): 2.0mm above the 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 42.1mm
Neck Thickness Near 1st Fret: 21.7mm
Neck Thickness at 12th Fret: 22.6mm
Scale length: 648mm (25.5")
Fingerboard radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance Areas: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment, Nut Slot Adjustment
* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please be aware of this beforehand.
* Any measurements listed for the truss rod, remaining frets, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the instrument will have the same measurements upon arrival.
* This item is a one-of-a-kind piece currently listed on multiple marketplaces, including our physical store display. We strive to promptly remove sold items from listings, but updates may not occur in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
