✨ New Arrivals Just Dropped!Explore
[SN SZ2201477] USED FENDER USA / Eric Clapton UD Stratocaster BLK Black [06]
Made in 2003 at Corona factory in USA, Eric Clapton signature model.
Alder body, soft V-shaped one-piece maple neck.
Features vintage noiseless pickups, TBX control, 25db mid boost, blocked tremolo bridge, and other specs similar to Clapton himself.
Versatility is its greatest feature, reproducing the variety of sounds from his career over the years.
Fret and nut have been replaced. There is over lacquer accordingly.
There is distortion on the pickguard and scratches on the body top.
The pickguard is distorted and there are scratches on the top of the body.
It has been cleaned, adjusted, and rubbed after arrival and is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial Number: SZ2201477
Year of manufacture: 2002
Country of manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.68kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 21.6mm
Neck thickness near 12th fret: 23.0mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Alder body, soft V-shaped one-piece maple neck.
Features vintage noiseless pickups, TBX control, 25db mid boost, blocked tremolo bridge, and other specs similar to Clapton himself.
Versatility is its greatest feature, reproducing the variety of sounds from his career over the years.
Fret and nut have been replaced. There is over lacquer accordingly.
There is distortion on the pickguard and scratches on the body top.
The pickguard is distorted and there are scratches on the top of the body.
It has been cleaned, adjusted, and rubbed after arrival and is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial Number: SZ2201477
Year of manufacture: 2002
Country of manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.68kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 21.6mm
Neck thickness near 12th fret: 23.0mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$7.17
[SN SZ2201477] USED FENDER USA / Eric Clapton UD Stratocaster BLK Black [06]—
$7.17
Description
Made in 2003 at Corona factory in USA, Eric Clapton signature model.
Alder body, soft V-shaped one-piece maple neck.
Features vintage noiseless pickups, TBX control, 25db mid boost, blocked tremolo bridge, and other specs similar to Clapton himself.
Versatility is its greatest feature, reproducing the variety of sounds from his career over the years.
Fret and nut have been replaced. There is over lacquer accordingly.
There is distortion on the pickguard and scratches on the body top.
The pickguard is distorted and there are scratches on the top of the body.
It has been cleaned, adjusted, and rubbed after arrival and is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial Number: SZ2201477
Year of manufacture: 2002
Country of manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.68kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 21.6mm
Neck thickness near 12th fret: 23.0mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Alder body, soft V-shaped one-piece maple neck.
Features vintage noiseless pickups, TBX control, 25db mid boost, blocked tremolo bridge, and other specs similar to Clapton himself.
Versatility is its greatest feature, reproducing the variety of sounds from his career over the years.
Fret and nut have been replaced. There is over lacquer accordingly.
There is distortion on the pickguard and scratches on the body top.
The pickguard is distorted and there are scratches on the top of the body.
It has been cleaned, adjusted, and rubbed after arrival and is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial Number: SZ2201477
Year of manufacture: 2002
Country of manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.68kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 21.6mm
Neck thickness near 12th fret: 23.0mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
