✨ New Arrivals Just Dropped!Explore
[SN 658562] USED FENDER / 1975 Stratocaster Sunburst [20]
This 1975 model features specifications different from those of the 1950s and 1960s, including a large headstock, a truss rod adjustment nut accessible from the headstock, and a three-point neck joint.
The neck is made of one-piece maple, and the date stamp is 0903 3855, indicating it was manufactured in 1975.
The body appears to be alder based on the grain.
The pickups, manufactured in 1974 and 1975, feature flat pole pieces and gray bobbins, with pickup dates as follows: F: 185374, C: 85374, R: 80325.
The POT DATE is 1974.
There are numerous paint chips on the body contours and corners, and there are also many dents, paint chips, and cracks throughout the body.
The pickguard has been replaced, and there is some discoloration and rust on the parts.
There are multiple areas of paint chipping and cracking on the headstock corners and neck, and there is paint discoloration at the very bottom of the body.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 658562
Year of Manufacture: 1975
Country of Manufacture: USA
Case: Original hard case
Accessories: Tonearm
Weight: 3.5 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; in like-new condition
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.5 mm
Neck thickness near the 1st fret: 21.8 mm
Neck thickness near the 12th fret: 23.3 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, refretting, nut replacement
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
The neck is made of one-piece maple, and the date stamp is 0903 3855, indicating it was manufactured in 1975.
The body appears to be alder based on the grain.
The pickups, manufactured in 1974 and 1975, feature flat pole pieces and gray bobbins, with pickup dates as follows: F: 185374, C: 85374, R: 80325.
The POT DATE is 1974.
There are numerous paint chips on the body contours and corners, and there are also many dents, paint chips, and cracks throughout the body.
The pickguard has been replaced, and there is some discoloration and rust on the parts.
There are multiple areas of paint chipping and cracking on the headstock corners and neck, and there is paint discoloration at the very bottom of the body.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 658562
Year of Manufacture: 1975
Country of Manufacture: USA
Case: Original hard case
Accessories: Tonearm
Weight: 3.5 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; in like-new condition
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.5 mm
Neck thickness near the 1st fret: 21.8 mm
Neck thickness near the 12th fret: 23.3 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, refretting, nut replacement
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$7.89
Original: $22.54
-65%[SN 658562] USED FENDER / 1975 Stratocaster Sunburst [20]—
$22.54
$7.89














Description
This 1975 model features specifications different from those of the 1950s and 1960s, including a large headstock, a truss rod adjustment nut accessible from the headstock, and a three-point neck joint.
The neck is made of one-piece maple, and the date stamp is 0903 3855, indicating it was manufactured in 1975.
The body appears to be alder based on the grain.
The pickups, manufactured in 1974 and 1975, feature flat pole pieces and gray bobbins, with pickup dates as follows: F: 185374, C: 85374, R: 80325.
The POT DATE is 1974.
There are numerous paint chips on the body contours and corners, and there are also many dents, paint chips, and cracks throughout the body.
The pickguard has been replaced, and there is some discoloration and rust on the parts.
There are multiple areas of paint chipping and cracking on the headstock corners and neck, and there is paint discoloration at the very bottom of the body.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 658562
Year of Manufacture: 1975
Country of Manufacture: USA
Case: Original hard case
Accessories: Tonearm
Weight: 3.5 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; in like-new condition
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.5 mm
Neck thickness near the 1st fret: 21.8 mm
Neck thickness near the 12th fret: 23.3 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, refretting, nut replacement
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
The neck is made of one-piece maple, and the date stamp is 0903 3855, indicating it was manufactured in 1975.
The body appears to be alder based on the grain.
The pickups, manufactured in 1974 and 1975, feature flat pole pieces and gray bobbins, with pickup dates as follows: F: 185374, C: 85374, R: 80325.
The POT DATE is 1974.
There are numerous paint chips on the body contours and corners, and there are also many dents, paint chips, and cracks throughout the body.
The pickguard has been replaced, and there is some discoloration and rust on the parts.
There are multiple areas of paint chipping and cracking on the headstock corners and neck, and there is paint discoloration at the very bottom of the body.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 658562
Year of Manufacture: 1975
Country of Manufacture: USA
Case: Original hard case
Accessories: Tonearm
Weight: 3.5 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; in like-new condition
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.5 mm
Neck thickness near the 1st fret: 21.8 mm
Neck thickness near the 12th fret: 23.3 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, refretting, nut replacement
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
























