✨ New Arrivals Just Dropped!Explore
[SN CS10800] USED Gibson Custom Shop / Les Paul Class 5 Figured Top Translucent Blue [12]
The Les Paul Class 5 with a beautifully grained top is now in stock.
The top is made of 5A grade flame maple, which is the origin of the model's name, and is a model that will greatly stimulate guitarists' desire for ownership.
The neck is deeply jointed under the front pickup with a long tenon, and a 60s-style slim taper neck is used, making this model a good choice for those with a technical playing style.
Burstbucker #2 (front) and #3 (rear) pickups are equipped as standard, and the vintage tone with slightly higher output can be used for a wide range of modern rock sounds.
There are numerous scratches and dings scattered throughout, and the hardware is dull and greenish-blue.
According to the included warranty card, the original color was Transformer Blue, but due to fading, the color is closer to Transformer Black.
The front/rear volume has been replaced with CTS and the jack plate has been replaced with a non-original part.
There are cracks on the control plate and control knobs, but they do not interfere with use.
It has a slight feeling of use, but playability is good as each part has been maintained and cleaned at our repair center.
Item Rank: B: Fairly scratched and used, but no problem in normal use.
Serial Number: CS10800
Year of manufacture: 2001
Country of manufacture: USA
Case: Original hard case
Weight: 4.38kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right, no problem.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 22.5mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modified: Front/Rear Volume Pot, Jack Plate
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* There are some scratches, dents, etc. that are difficult to see in the pictures or are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
The top is made of 5A grade flame maple, which is the origin of the model's name, and is a model that will greatly stimulate guitarists' desire for ownership.
The neck is deeply jointed under the front pickup with a long tenon, and a 60s-style slim taper neck is used, making this model a good choice for those with a technical playing style.
Burstbucker #2 (front) and #3 (rear) pickups are equipped as standard, and the vintage tone with slightly higher output can be used for a wide range of modern rock sounds.
There are numerous scratches and dings scattered throughout, and the hardware is dull and greenish-blue.
According to the included warranty card, the original color was Transformer Blue, but due to fading, the color is closer to Transformer Black.
The front/rear volume has been replaced with CTS and the jack plate has been replaced with a non-original part.
There are cracks on the control plate and control knobs, but they do not interfere with use.
It has a slight feeling of use, but playability is good as each part has been maintained and cleaned at our repair center.
Item Rank: B: Fairly scratched and used, but no problem in normal use.
Serial Number: CS10800
Year of manufacture: 2001
Country of manufacture: USA
Case: Original hard case
Weight: 4.38kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right, no problem.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 22.5mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modified: Front/Rear Volume Pot, Jack Plate
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* There are some scratches, dents, etc. that are difficult to see in the pictures or are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$6.58
Original: $18.79
-65%[SN CS10800] USED Gibson Custom Shop / Les Paul Class 5 Figured Top Translucent Blue [12]—
$18.79
$6.58
Description
The Les Paul Class 5 with a beautifully grained top is now in stock.
The top is made of 5A grade flame maple, which is the origin of the model's name, and is a model that will greatly stimulate guitarists' desire for ownership.
The neck is deeply jointed under the front pickup with a long tenon, and a 60s-style slim taper neck is used, making this model a good choice for those with a technical playing style.
Burstbucker #2 (front) and #3 (rear) pickups are equipped as standard, and the vintage tone with slightly higher output can be used for a wide range of modern rock sounds.
There are numerous scratches and dings scattered throughout, and the hardware is dull and greenish-blue.
According to the included warranty card, the original color was Transformer Blue, but due to fading, the color is closer to Transformer Black.
The front/rear volume has been replaced with CTS and the jack plate has been replaced with a non-original part.
There are cracks on the control plate and control knobs, but they do not interfere with use.
It has a slight feeling of use, but playability is good as each part has been maintained and cleaned at our repair center.
Item Rank: B: Fairly scratched and used, but no problem in normal use.
Serial Number: CS10800
Year of manufacture: 2001
Country of manufacture: USA
Case: Original hard case
Weight: 4.38kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right, no problem.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 22.5mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modified: Front/Rear Volume Pot, Jack Plate
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* There are some scratches, dents, etc. that are difficult to see in the pictures or are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
The top is made of 5A grade flame maple, which is the origin of the model's name, and is a model that will greatly stimulate guitarists' desire for ownership.
The neck is deeply jointed under the front pickup with a long tenon, and a 60s-style slim taper neck is used, making this model a good choice for those with a technical playing style.
Burstbucker #2 (front) and #3 (rear) pickups are equipped as standard, and the vintage tone with slightly higher output can be used for a wide range of modern rock sounds.
There are numerous scratches and dings scattered throughout, and the hardware is dull and greenish-blue.
According to the included warranty card, the original color was Transformer Blue, but due to fading, the color is closer to Transformer Black.
The front/rear volume has been replaced with CTS and the jack plate has been replaced with a non-original part.
There are cracks on the control plate and control knobs, but they do not interfere with use.
It has a slight feeling of use, but playability is good as each part has been maintained and cleaned at our repair center.
Item Rank: B: Fairly scratched and used, but no problem in normal use.
Serial Number: CS10800
Year of manufacture: 2001
Country of manufacture: USA
Case: Original hard case
Weight: 4.38kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right, no problem.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 22.5mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modified: Front/Rear Volume Pot, Jack Plate
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* There are some scratches, dents, etc. that are difficult to see in the pictures or are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
