✨ New Arrivals Just Dropped!Explore
USED Heerby / LS-500 Brown Sunburst [11]
The Heerby Les Paul-style "LS-500" is now in stock!
This is a Japan Vintage model produced by Kasuga Gakki in the 1970s, a guitar that epitomizes the replica model culture of that era.
Featuring a set-neck construction, it achieves both the rich, full-bodied sound characteristic of a Les Paul and a comfortable, well-balanced playability.
The warm, full-bodied tone produced by the humbucker pickups is versatile enough to handle everything from clean to distorted sounds.
Overall, there are signs of age-appropriate wear, including scratches, dents, paint peeling, and discoloration.
Signs of aging, such as rust and tarnish, are visible on the metal parts.
There are several areas of paint peeling at the body end where the wood is visible.
There are dents on the back of the neck, paint peeling and dents on the headstock, and overall fading.
The back of the headstock is significantly chipped, exposing the wood.
There are slight cracks in the neck binding. There is some dirt.
The neck shows no noticeable abnormalities and is suitable for normal use.
Condition Grade: B: Shows significant wear and signs of use, but is suitable for normal use
Case: Non-original soft case
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (some warping and waviness; limited adjustment remaining)
Fret Wear: Defects present; replacement should be considered during the next repair
String height (low-string side): 2.0 mm at the 12th fret
String Height (Treble Side): 1.5 mm at the 12th fret
Nut width: 43.6 mm
Neck thickness near the 1st fret: 20.1 mm
Neck thickness near the 12th fret: 24.6 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, electronics repair
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind piece and is listed simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
This is a Japan Vintage model produced by Kasuga Gakki in the 1970s, a guitar that epitomizes the replica model culture of that era.
Featuring a set-neck construction, it achieves both the rich, full-bodied sound characteristic of a Les Paul and a comfortable, well-balanced playability.
The warm, full-bodied tone produced by the humbucker pickups is versatile enough to handle everything from clean to distorted sounds.
Overall, there are signs of age-appropriate wear, including scratches, dents, paint peeling, and discoloration.
Signs of aging, such as rust and tarnish, are visible on the metal parts.
There are several areas of paint peeling at the body end where the wood is visible.
There are dents on the back of the neck, paint peeling and dents on the headstock, and overall fading.
The back of the headstock is significantly chipped, exposing the wood.
There are slight cracks in the neck binding. There is some dirt.
The neck shows no noticeable abnormalities and is suitable for normal use.
Condition Grade: B: Shows significant wear and signs of use, but is suitable for normal use
Case: Non-original soft case
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (some warping and waviness; limited adjustment remaining)
Fret Wear: Defects present; replacement should be considered during the next repair
String height (low-string side): 2.0 mm at the 12th fret
String Height (Treble Side): 1.5 mm at the 12th fret
Nut width: 43.6 mm
Neck thickness near the 1st fret: 20.1 mm
Neck thickness near the 12th fret: 24.6 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, electronics repair
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind piece and is listed simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$0.62
Original: $1.76
-65%USED Heerby / LS-500 Brown Sunburst [11]—
$1.76
$0.62
Description
The Heerby Les Paul-style "LS-500" is now in stock!
This is a Japan Vintage model produced by Kasuga Gakki in the 1970s, a guitar that epitomizes the replica model culture of that era.
Featuring a set-neck construction, it achieves both the rich, full-bodied sound characteristic of a Les Paul and a comfortable, well-balanced playability.
The warm, full-bodied tone produced by the humbucker pickups is versatile enough to handle everything from clean to distorted sounds.
Overall, there are signs of age-appropriate wear, including scratches, dents, paint peeling, and discoloration.
Signs of aging, such as rust and tarnish, are visible on the metal parts.
There are several areas of paint peeling at the body end where the wood is visible.
There are dents on the back of the neck, paint peeling and dents on the headstock, and overall fading.
The back of the headstock is significantly chipped, exposing the wood.
There are slight cracks in the neck binding. There is some dirt.
The neck shows no noticeable abnormalities and is suitable for normal use.
Condition Grade: B: Shows significant wear and signs of use, but is suitable for normal use
Case: Non-original soft case
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (some warping and waviness; limited adjustment remaining)
Fret Wear: Defects present; replacement should be considered during the next repair
String height (low-string side): 2.0 mm at the 12th fret
String Height (Treble Side): 1.5 mm at the 12th fret
Nut width: 43.6 mm
Neck thickness near the 1st fret: 20.1 mm
Neck thickness near the 12th fret: 24.6 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, electronics repair
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind piece and is listed simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
This is a Japan Vintage model produced by Kasuga Gakki in the 1970s, a guitar that epitomizes the replica model culture of that era.
Featuring a set-neck construction, it achieves both the rich, full-bodied sound characteristic of a Les Paul and a comfortable, well-balanced playability.
The warm, full-bodied tone produced by the humbucker pickups is versatile enough to handle everything from clean to distorted sounds.
Overall, there are signs of age-appropriate wear, including scratches, dents, paint peeling, and discoloration.
Signs of aging, such as rust and tarnish, are visible on the metal parts.
There are several areas of paint peeling at the body end where the wood is visible.
There are dents on the back of the neck, paint peeling and dents on the headstock, and overall fading.
The back of the headstock is significantly chipped, exposing the wood.
There are slight cracks in the neck binding. There is some dirt.
The neck shows no noticeable abnormalities and is suitable for normal use.
Condition Grade: B: Shows significant wear and signs of use, but is suitable for normal use
Case: Non-original soft case
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (some warping and waviness; limited adjustment remaining)
Fret Wear: Defects present; replacement should be considered during the next repair
String height (low-string side): 2.0 mm at the 12th fret
String Height (Treble Side): 1.5 mm at the 12th fret
Nut width: 43.6 mm
Neck thickness near the 1st fret: 20.1 mm
Neck thickness near the 12th fret: 24.6 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, electronics repair
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind piece and is listed simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
