✨ New Arrivals Just Dropped!Explore
HomeStore
[SN 001208] USED YAMAHA / SC-1200 Stain (ST) Super Combination [3.66 kg / Manufactured in 1977] Yamaha Made in Japan [08]
[SN 001208] USED YAMAHA / SC-1200 Stain (ST) Super Combination [3.66 kg / Manufactured in 1977] Yamaha Made in Japan [08]
This is the SC-1200 from Yamaha’s SC series, a high-end model featuring a through-neck construction, manufactured in 1997.
The SC series features three 3-position phase switches, offering a total of 13 pickup switching patterns. It features a maple/mahogany through-neck, a maple/mahogany/alder body wing, an ebony fingerboard, three bar-type single-coil pickups, three 3-way switches, and a die-cast bridge with a sustain block.
This is a high-end model common to all models in the series, offering a wide variety of sound variations, including half-tone and phase-out effects.
Signs of use are visible (including impact marks, scratches, scuffs, polishing marks, picking marks, buckle marks, dents on the back of the neck, paint unevenness at wood joints, and tarnish, pitting, or rust on metal parts and screws, among other cosmetic damage).
Setup was performed upon arrival (cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, neck straightening, deburring, and nut slot correction). The originally narrow fret tops have been leveled to a lower profile but remain at a height suitable for playing, and the truss rod is at its maximum tightening limit with no issues. *Not covered by warranty
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: 001208
Year of Manufacture: 1977
Country of Manufacture: Japan
Case: Gig bag
Weight: 3.66 kg
Truss Rod: Note: At maximum adjustment, but currently no issues with the neck
Fret Wear: Note: Fret height is low, but they can still withstand further filing
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs & Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, neck straightening, deburring, nut slot correction
* As this is a used item, there may be scratches, dents, and other imperfections that are difficult to capture in photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret height, string height, etc., were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The SC series features three 3-position phase switches, offering a total of 13 pickup switching patterns. It features a maple/mahogany through-neck, a maple/mahogany/alder body wing, an ebony fingerboard, three bar-type single-coil pickups, three 3-way switches, and a die-cast bridge with a sustain block.
This is a high-end model common to all models in the series, offering a wide variety of sound variations, including half-tone and phase-out effects.
Signs of use are visible (including impact marks, scratches, scuffs, polishing marks, picking marks, buckle marks, dents on the back of the neck, paint unevenness at wood joints, and tarnish, pitting, or rust on metal parts and screws, among other cosmetic damage).
Setup was performed upon arrival (cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, neck straightening, deburring, and nut slot correction). The originally narrow fret tops have been leveled to a lower profile but remain at a height suitable for playing, and the truss rod is at its maximum tightening limit with no issues. *Not covered by warranty
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: 001208
Year of Manufacture: 1977
Country of Manufacture: Japan
Case: Gig bag
Weight: 3.66 kg
Truss Rod: Note: At maximum adjustment, but currently no issues with the neck
Fret Wear: Note: Fret height is low, but they can still withstand further filing
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs & Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, neck straightening, deburring, nut slot correction
* As this is a used item, there may be scratches, dents, and other imperfections that are difficult to capture in photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret height, string height, etc., were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$1.73
Original: $4.95
-65%[SN 001208] USED YAMAHA / SC-1200 Stain (ST) Super Combination [3.66 kg / Manufactured in 1977] Yamaha Made in Japan [08]—
$4.95
$1.73
Description
This is the SC-1200 from Yamaha’s SC series, a high-end model featuring a through-neck construction, manufactured in 1997.
The SC series features three 3-position phase switches, offering a total of 13 pickup switching patterns. It features a maple/mahogany through-neck, a maple/mahogany/alder body wing, an ebony fingerboard, three bar-type single-coil pickups, three 3-way switches, and a die-cast bridge with a sustain block.
This is a high-end model common to all models in the series, offering a wide variety of sound variations, including half-tone and phase-out effects.
Signs of use are visible (including impact marks, scratches, scuffs, polishing marks, picking marks, buckle marks, dents on the back of the neck, paint unevenness at wood joints, and tarnish, pitting, or rust on metal parts and screws, among other cosmetic damage).
Setup was performed upon arrival (cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, neck straightening, deburring, and nut slot correction). The originally narrow fret tops have been leveled to a lower profile but remain at a height suitable for playing, and the truss rod is at its maximum tightening limit with no issues. *Not covered by warranty
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: 001208
Year of Manufacture: 1977
Country of Manufacture: Japan
Case: Gig bag
Weight: 3.66 kg
Truss Rod: Note: At maximum adjustment, but currently no issues with the neck
Fret Wear: Note: Fret height is low, but they can still withstand further filing
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs & Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, neck straightening, deburring, nut slot correction
* As this is a used item, there may be scratches, dents, and other imperfections that are difficult to capture in photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret height, string height, etc., were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The SC series features three 3-position phase switches, offering a total of 13 pickup switching patterns. It features a maple/mahogany through-neck, a maple/mahogany/alder body wing, an ebony fingerboard, three bar-type single-coil pickups, three 3-way switches, and a die-cast bridge with a sustain block.
This is a high-end model common to all models in the series, offering a wide variety of sound variations, including half-tone and phase-out effects.
Signs of use are visible (including impact marks, scratches, scuffs, polishing marks, picking marks, buckle marks, dents on the back of the neck, paint unevenness at wood joints, and tarnish, pitting, or rust on metal parts and screws, among other cosmetic damage).
Setup was performed upon arrival (cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, neck straightening, deburring, and nut slot correction). The originally narrow fret tops have been leveled to a lower profile but remain at a height suitable for playing, and the truss rod is at its maximum tightening limit with no issues. *Not covered by warranty
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: 001208
Year of Manufacture: 1977
Country of Manufacture: Japan
Case: Gig bag
Weight: 3.66 kg
Truss Rod: Note: At maximum adjustment, but currently no issues with the neck
Fret Wear: Note: Fret height is low, but they can still withstand further filing
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs & Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, neck straightening, deburring, nut slot correction
* As this is a used item, there may be scratches, dents, and other imperfections that are difficult to capture in photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret height, string height, etc., were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
