✨ New Arrivals Just Dropped!Explore
[SN 737789] USED GIBSON USA / Les Paul Deluxe 1972 Gold Top [06]
The 70's Les Paul Deluxe, which has been gaining in reputation in recent years, is now in stock!
This instrument is made in the early 70's with a pancake body made of thin maple between mahogany backs, maple top, 3-piece mahogany neck with volute, and rosewood fingerboard.
The pickups, a key feature of the Deluxe, are mini humbuckers with PAT number stickers on both the front and rear. The cover is engraved with the Gibson logo, a specification that was only available for a very short period of time.
Other electrical components are also original. Some pots are soldered and the date cannot be seen, but the date "1377230" can be seen on the front tone pot.
The pegs are double-ring Crusons, and the bridge and tailpiece are also believed to be original.
The frets are original, but have been worn down to a very low level. The frets are believed to be original, but have been worn down to a very low level. The nut also has a deeper groove to match the height of the frets.
As for other changes and modifications, the corner of the bridge saddle has been shaved. The third string peg shaft is slightly bent, but this is not a problem. The jack plate has been replaced with a brass one.
There is a chip on the tip of the head, a buckle mark on the back of the body, and other age-related scratches and dings throughout.
The vintage gold top has a deep greenish-blue color, which is typical of vintage gold tops, and this guitar has a lot of character.
The hard case is original, but the handle is damaged.
Item Rank: B+: Some scratches, but no problem for normal use.
Serial number: 737789
Year of manufacture: 1972
Country of manufacture: USA
Case: Hard case (handle is broken)
Weight: 4.36kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret remaining: about 20-30%, need to consider replacing when next time for repair
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 24.6mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
This instrument is made in the early 70's with a pancake body made of thin maple between mahogany backs, maple top, 3-piece mahogany neck with volute, and rosewood fingerboard.
The pickups, a key feature of the Deluxe, are mini humbuckers with PAT number stickers on both the front and rear. The cover is engraved with the Gibson logo, a specification that was only available for a very short period of time.
Other electrical components are also original. Some pots are soldered and the date cannot be seen, but the date "1377230" can be seen on the front tone pot.
The pegs are double-ring Crusons, and the bridge and tailpiece are also believed to be original.
The frets are original, but have been worn down to a very low level. The frets are believed to be original, but have been worn down to a very low level. The nut also has a deeper groove to match the height of the frets.
As for other changes and modifications, the corner of the bridge saddle has been shaved. The third string peg shaft is slightly bent, but this is not a problem. The jack plate has been replaced with a brass one.
There is a chip on the tip of the head, a buckle mark on the back of the body, and other age-related scratches and dings throughout.
The vintage gold top has a deep greenish-blue color, which is typical of vintage gold tops, and this guitar has a lot of character.
The hard case is original, but the handle is damaged.
Item Rank: B+: Some scratches, but no problem for normal use.
Serial number: 737789
Year of manufacture: 1972
Country of manufacture: USA
Case: Hard case (handle is broken)
Weight: 4.36kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret remaining: about 20-30%, need to consider replacing when next time for repair
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 24.6mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$39.66
[SN 737789] USED GIBSON USA / Les Paul Deluxe 1972 Gold Top [06]—
$39.66
Description
The 70's Les Paul Deluxe, which has been gaining in reputation in recent years, is now in stock!
This instrument is made in the early 70's with a pancake body made of thin maple between mahogany backs, maple top, 3-piece mahogany neck with volute, and rosewood fingerboard.
The pickups, a key feature of the Deluxe, are mini humbuckers with PAT number stickers on both the front and rear. The cover is engraved with the Gibson logo, a specification that was only available for a very short period of time.
Other electrical components are also original. Some pots are soldered and the date cannot be seen, but the date "1377230" can be seen on the front tone pot.
The pegs are double-ring Crusons, and the bridge and tailpiece are also believed to be original.
The frets are original, but have been worn down to a very low level. The frets are believed to be original, but have been worn down to a very low level. The nut also has a deeper groove to match the height of the frets.
As for other changes and modifications, the corner of the bridge saddle has been shaved. The third string peg shaft is slightly bent, but this is not a problem. The jack plate has been replaced with a brass one.
There is a chip on the tip of the head, a buckle mark on the back of the body, and other age-related scratches and dings throughout.
The vintage gold top has a deep greenish-blue color, which is typical of vintage gold tops, and this guitar has a lot of character.
The hard case is original, but the handle is damaged.
Item Rank: B+: Some scratches, but no problem for normal use.
Serial number: 737789
Year of manufacture: 1972
Country of manufacture: USA
Case: Hard case (handle is broken)
Weight: 4.36kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret remaining: about 20-30%, need to consider replacing when next time for repair
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 24.6mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
This instrument is made in the early 70's with a pancake body made of thin maple between mahogany backs, maple top, 3-piece mahogany neck with volute, and rosewood fingerboard.
The pickups, a key feature of the Deluxe, are mini humbuckers with PAT number stickers on both the front and rear. The cover is engraved with the Gibson logo, a specification that was only available for a very short period of time.
Other electrical components are also original. Some pots are soldered and the date cannot be seen, but the date "1377230" can be seen on the front tone pot.
The pegs are double-ring Crusons, and the bridge and tailpiece are also believed to be original.
The frets are original, but have been worn down to a very low level. The frets are believed to be original, but have been worn down to a very low level. The nut also has a deeper groove to match the height of the frets.
As for other changes and modifications, the corner of the bridge saddle has been shaved. The third string peg shaft is slightly bent, but this is not a problem. The jack plate has been replaced with a brass one.
There is a chip on the tip of the head, a buckle mark on the back of the body, and other age-related scratches and dings throughout.
The vintage gold top has a deep greenish-blue color, which is typical of vintage gold tops, and this guitar has a lot of character.
The hard case is original, but the handle is damaged.
Item Rank: B+: Some scratches, but no problem for normal use.
Serial number: 737789
Year of manufacture: 1972
Country of manufacture: USA
Case: Hard case (handle is broken)
Weight: 4.36kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret remaining: about 20-30%, need to consider replacing when next time for repair
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 24.6mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
