✨ New Arrivals Just Dropped!Explore
[SN 1502010] USED MORRIS / SC-81 [03]
We have received a used Morris SC-81 guitar made in Japan.
This SC-81 is an entry-level model in the S series, featuring a slightly wider fingerboard and a slim neck.
The body is constructed entirely of solid mahogany, with a solid African mahogany top and solid African mahogany sides and back.
It has a 44mm nut width and a 652mm scale length.
The tone has the warm, mellow character typical of mahogany, making it an ideal guitar for fingerstyle playing, such as solo guitar.
There are minor dents and scratches throughout the body. There is a dent on the headstock. The string action is on the low side, measuring approximately 2.2mm at the 12th fret on the 6th string.
The truss rod is somewhat stiff, but there is approximately 60 degrees of play in the tightening direction.
It comes with the original hard case.
Truss rod: Approximately 60 degrees of adjustment remaining in the tightening direction
Neck condition: No issues
Frets: 80% remaining
Case: Original hard case
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: 1502010
Country of Manufacture: Japan
Case: Hard case
Accessories: Wrench
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-E string): 2.2 mm at the 12th fret
String height (treble side): 1.7 mm at the 12th fret
Strings at setup: D'Addario EJ-16 / .012-.053 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, fretting board leveling, nut adjustment
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
This SC-81 is an entry-level model in the S series, featuring a slightly wider fingerboard and a slim neck.
The body is constructed entirely of solid mahogany, with a solid African mahogany top and solid African mahogany sides and back.
It has a 44mm nut width and a 652mm scale length.
The tone has the warm, mellow character typical of mahogany, making it an ideal guitar for fingerstyle playing, such as solo guitar.
There are minor dents and scratches throughout the body. There is a dent on the headstock. The string action is on the low side, measuring approximately 2.2mm at the 12th fret on the 6th string.
The truss rod is somewhat stiff, but there is approximately 60 degrees of play in the tightening direction.
It comes with the original hard case.
Truss rod: Approximately 60 degrees of adjustment remaining in the tightening direction
Neck condition: No issues
Frets: 80% remaining
Case: Original hard case
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: 1502010
Country of Manufacture: Japan
Case: Hard case
Accessories: Wrench
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-E string): 2.2 mm at the 12th fret
String height (treble side): 1.7 mm at the 12th fret
Strings at setup: D'Addario EJ-16 / .012-.053 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, fretting board leveling, nut adjustment
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$2.39
Original: $6.82
-65%[SN 1502010] USED MORRIS / SC-81 [03]—
$6.82
$2.39
Description
We have received a used Morris SC-81 guitar made in Japan.
This SC-81 is an entry-level model in the S series, featuring a slightly wider fingerboard and a slim neck.
The body is constructed entirely of solid mahogany, with a solid African mahogany top and solid African mahogany sides and back.
It has a 44mm nut width and a 652mm scale length.
The tone has the warm, mellow character typical of mahogany, making it an ideal guitar for fingerstyle playing, such as solo guitar.
There are minor dents and scratches throughout the body. There is a dent on the headstock. The string action is on the low side, measuring approximately 2.2mm at the 12th fret on the 6th string.
The truss rod is somewhat stiff, but there is approximately 60 degrees of play in the tightening direction.
It comes with the original hard case.
Truss rod: Approximately 60 degrees of adjustment remaining in the tightening direction
Neck condition: No issues
Frets: 80% remaining
Case: Original hard case
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: 1502010
Country of Manufacture: Japan
Case: Hard case
Accessories: Wrench
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-E string): 2.2 mm at the 12th fret
String height (treble side): 1.7 mm at the 12th fret
Strings at setup: D'Addario EJ-16 / .012-.053 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, fretting board leveling, nut adjustment
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
This SC-81 is an entry-level model in the S series, featuring a slightly wider fingerboard and a slim neck.
The body is constructed entirely of solid mahogany, with a solid African mahogany top and solid African mahogany sides and back.
It has a 44mm nut width and a 652mm scale length.
The tone has the warm, mellow character typical of mahogany, making it an ideal guitar for fingerstyle playing, such as solo guitar.
There are minor dents and scratches throughout the body. There is a dent on the headstock. The string action is on the low side, measuring approximately 2.2mm at the 12th fret on the 6th string.
The truss rod is somewhat stiff, but there is approximately 60 degrees of play in the tightening direction.
It comes with the original hard case.
Truss rod: Approximately 60 degrees of adjustment remaining in the tightening direction
Neck condition: No issues
Frets: 80% remaining
Case: Original hard case
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: 1502010
Country of Manufacture: Japan
Case: Hard case
Accessories: Wrench
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-E string): 2.2 mm at the 12th fret
String height (treble side): 1.7 mm at the 12th fret
Strings at setup: D'Addario EJ-16 / .012-.053 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, fretting board leveling, nut adjustment
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
